The Thio Wooden Track Light A single hardwired ceiling installation replaces multiple light points, with independently adjustable brass arms to direct light exactly where needed.
A solid walnut bar runs the length of the fixture, giving it the visual weight of a furniture piece rather than a utility fitting. The brass arms catch the light at their own angles, and the whole assembly reads as something intentional on the ceiling — not just a light source.
Available in 1, 2, 3, and 4-Light configurations. Start with what the space calls for now.
🎯
One Installation. Every Direction.
Each Light pivots and rotates independently — aim them where the room actually needs light.
Why Thio
🎯
Individually Adjustable Arms
Each Light pivots and rotates on its own. Point one at the dining table, another at the artwork, another at the reading chair — all from a single ceiling box.
🪵
Walnut Wood Bar
The warm walnut running the length of the track gives the fixture a visual presence metal-only track lights lack. It reads as a considered object, not a utilitarian install.
✨
Brass Arms
Each arm is finished in warm brass that catches light at its own angle, adding depth to the fixture's silhouette from every position in the room.
🔆
Dimmer Compatible
Pair with a standard dimmer switch (sold separately) to dial all Light simultaneously — from full working brightness down to a low ambient setting.
Where It Lives
🍽 Dining Room 🍳 Kitchen 🛋 Living Room 🖥 Home Office 🖼 Gallery Wall 🏠 Open-Plan Space
Available Colors
2 finishes — both pair brass arms with a warm wood bar
Gold & Walnut
Gold & Wood
Configuration Sizes
📐
1-Light: Diameter 3.5 inches × Height 8.6 inches
📐
2-Light: Length 17.7 inches × Width 2.5 inches × Height 8.6 inches
📐
3-Light: Length 31.4 inches × Width 2.5 inches × Height 8.6 inches
📐
4-Light: Length 39.3 inches × Width 2.5 inches × Height 8.6 inches
⚡
Hardwired (installation required). This fixture connects directly to your ceiling's wiring. It replaces any existing ceiling light at a standard junction box. If you're not comfortable with electrical work, installed by a licensed electrician.
🔆
Dimmer Switch Not Included. This fixture is dimmer compatible, but the dimmer switch is sold separately. Check that your chosen dimmer is rated for LED loads if you're using LED bulbs.
Details
Bar MaterialWalnut Wood
ArmsBrass — individually adjustable
SocketE26 standard base
Bulb5W LED (40W incandescent equivalent, approx. 400–450 lumens per Light) (bulbs not included)
Configurations1, 2, 3, or 4 Light
CertificationsNorth America · Australia · Europe · Middle East
🇺🇸
Built for US Homes
Certified for North American homes. Runs on standard US 120V power and wires into any standard ceiling junction box. No voltage converter, no rewiring.
Downloads
